Cuztom Tuning Type-R 3D Wavy JDM Mug Style Window Visor Rain Guard Deflector Compatible with 2016-2021 Honda Civic FK4 FK7 FK8 5DR Hatchback LX EX Touring Sport

It's a bit off but it is very stylish on my civic.

I just got these today for my 2019 Honda Civic Hatchback Sport today and before peeling off the adhesive “3M” tape, I made sure that they would line up correctly on my windows and they did. I stuck all four of these on with ease and no problem. I also made sure to give them firm pressure throughout and I tried to see if I could take back off and they are stuck on very well. No window rubbing or hitting. Not sure what other reviews say they are the wrong fitment and they hit. Also saw the video that “Bryan” posted and if you look at the video several times you’ll notice he’s trying to put these on a civic sedan, not a hatch. It says in the description clearly for civic “Hatchback” not sedan. So make sure you are putting these on a hatchback and not a sedan before giving it a bad review! I would highly recommend!

It's flexible, durable, quite strong and well designed, black gloss as advertised. But I warn you: Replace tape that comes with it with 3M grade automotive mounting tape or it won't hold; I got mine from auto zone. Other than crappy tape, it's a perfect fit for my 10th gen civic hatchback. Number one thing you cannot skip is get the surface clean before attaching. Give some time to put on and adjust as you go. When you do this aim higher so window doesn't hit it when you roll up or down your windows. Also: use something as a heat gun to warm the tape, it helps with bonding it to the car. I brought out my hair drier and an extension cord because it works and won't harm paint. 3M tape is removable with dental floss and pulling at an angle if for whatever reason you decide to remove it later. Left review to make this straight forward as possible.

So I bought this and installed this the other day. I was at first hesitant after reading all the reviews about not fitting correctly, hits the visor when rolling the windows up and down, and even the adhesion not being strong enough. But I loved the look and bought it anyways.When I received it, I first dry fitted it and the passenger rear visor didn’t line up perfectly. I it wasn’t too bad. I also had my wife roll the windows up and down while I held it in place. It did knick the visor on the front passenger side but after adjusting it higher it cleared it and didn’t hit the visor. I also bought 3M Double sided tape from my local auto store and was planning on replacing the tape that was there (from reviews). But as I tried to remove the stock tape, it was really sticky. I even compared the tape on the visor and the 3M I bought as it was just as sticky or even stickier. So I decided not to mess with removing the original tape. I did use a hot gun to heat up the tape to make sure it would stick well. Of course clean the trim on the car really well so no dirt or debris is there. If you don’t have a heat gun, maybe install it on a hot day to warm up the adhesive.In all I was satisfied with this product and it turned out well. I’m able to roll down the windows with no issues. Just make sure to dry fit it and roll the windows up and down to know where to attach it. I love the look!! Maybe I will update in a few months to see how it holds up.

Do not purchase these rain guards. The original tape is very cheap, which I replaced with 3M tape. The cuts of the visors were not the same for the rear windows, so they fit differently and leaked as well. The rear visors hit the window and vibrate on the window itself while driving. The front driver side visor also hits the window when rolling up.I contacted the seller and they offered a slightly discounted rate to repurchase the same trash visors.....and I get to pay taxes and shipping too. I'm taking these off the car and throwing them in the garbage. Don't waste your money or time on these subpar visors.

I contacted their support after I had already installed them on the car (my fk8 is black) I didn't notice until after i installed that these are actually a dark cyan blue color, not black. I told them that there must be a mistake and they sent me the wrong color but they said nah they are black but we can offer you some money back, meh they installed fine, function well just are not black, so I'll replace them eventually

These are great! They are $40 so not the best but not the worse.Yes, they are navy blue. they aren’t cut exactly, but if you figure out placement before sticking them, it covered the silver part of the window frame. I used the adhesive that it came with and it has survived three different storms in Los Angeles. I put them on a cold cloud day and they stuck on really well. I love them. I love the line design which goes really well with the civic hatchback.It’s $40, get it, you won’t regret it

there are a lot of reviews claiming that the adhesive strip are not 3M and that they will not stick.I was pretty worried about placing my order but the unique design of the visors made me give it a try.First off. I cleaned my trim using Windex and some Rubbing alcohol. it might not be recommended but i wanted to make sure there was zero dirt or grease.I don't have a way to heat the visors so I installed them on a hot day in order to let the glue bake onto the car.So far its been a month and none have fallen off. They look really cool. I did have an issues with the back right visor not being cut correctly. But after i messaged the seller, they promptly sent me a replacement visor.I really like this design because im a huge fan of angles. I really hate the original flat visors that come stock. the wavy visors add a nice touch to the sharp wavy parts of the car.