Carbhub640052 Carburetor for Tecumseh 640349 640054 640058 640058A HMSK80 HMSK85 HMSK90 HMSK100 HSMK110 LH318A LH358SA 8HP 9HP 10HP Snowblower Generator Chipper Shredder - Tecumseh 640052 640054 Carb

I was going to rebuild a carb for my 10hp snow blower but got this instead. Boy am I glad I did. Super easy way to get a small engine going after being neglected with bad gas. Some reviews state that the holes on the side are not threaded, well if you look at the original screws you will notice (at least on the last 2 I have done) a self-tapping, triangular shape or notched set of screws for those 2 holes. Installed like a dream, a bit to get the adjustment correct, but so much easier than rebuilding at about the same cost. Make sure to use non-ethanol gas and good to go. Can't speak longevity yet as I just installed and first use today. I feel it will be fine for some time if I stick to non-ethanol fuel.

I Bought this for my Yardman 10HP 30” Snowblower model 317E663H401 (1996). Arrived in 2 days in perfect condition and took maybe 10mins to install! Snowblower fired Right up & Sounds Great!! Thanks CarbHub!

I finally purchased this one after trying two others that were not--I have this one working just fine and I can set where I want it if anything changes--it is good quality and is exact replacement. I saw a review that stated there was no fitting for the primer bulb--it is there--it was there in the pictures in the ad for this carb.

Installed and engine started right up. A couple tweaks to the adjustments and was running like new.

Just did

Replaced non-adjustable carb on my snowblower and is running great!

Very little adjustments works wrll

fits

My snowblower is 22 yrs old. 6 years ago I replaced my carburetor with one that had a fixed jet. Lately it was running very rich and my oil was getting dirty and plug was fouled with unburnt fuel and carbon. It was time for a new one but wanted one that I could adjust...... This was easy to install and love you can adjust the fuel flow. I started the snowblower up and the carb needed minor refinement and runs great. If necessary I will modify my review in time.

I previously bought two QAZAKY carbs on Amazon for a 826 John Deere snowblower, and they both came with a pin size hole in the casting on the same side as the adjuster screws.This hole leaked gasoline as soon as I added gasoline to the fuel tank on the snowblower.I’ve since returned them and thought I would tried this supplier. Unfortunately it has the same pin hole. The casting is slightly different, so they aren’t sharing the same supplier for the casting. I find this very strange that two manufacturers of the casting have the identical flaw.I’ve used some epoxy to cover up the hole, so here’s hoping that works.The carb fits my snowblower perfectly, but I haven’t ran it yet.

This carb was a straight forward installation and seemed to be an exact replacement. After install the engine fired right up and ran well. I have not had snow yet so i haven’t been able to test it under a load. I will update once I have a chance to.

The picture in here shows a nipple or barb to hook up your primer line but the carb I got has NO PRIMER or place to hook the primer hose...a TOTAL waste....NOT HAPPY.

Great price for a bolt on replacement. A few minor tweaks and it got my 40 year old rototiller purring. Came quickly and works great