10M High Pressure Washer Drain 3000 PSI/180bar Hose Cleaning Kit Sewer Jetter Kit for Karcher K2 K3 K4 K5 K6 K7 Series & Bosch AQT Household Use Pressure Washer

As described, end to end easy fitting. Everything provided. Cleared the drain blockage.

Excellent, went off down the drain like a rocket, just pulled it back slowly a few times and the drain was clear, fitted to by evolution and lidl pressure washers.

Fits my karcher pressure washer perfectly, easy to use and does a great job.thought I only had a minor clog but but this got lots of sludge and stone out of then drains. Easy to use and as the head is a small size it goes through the pipes easily

Bought this after a we had blocked drain outside that took both rain water and waste water (shower/basin/sink).The drain would back up when continuous rain or after our evening showers, only onto the patio slightly, but still not great.I tried rodding it with drainage rods but because of the gully type, I wasn't able to attach the unblocking attachments, so was just jabbing with the rod end. Which worked a little the first time it happened. The second time it happened I knew I had to do something more.This worked a treat, it propelled itself through multiple silted up blockages, not immediately, you have to let it work and keep pulling it back and forth a little. But before it did free the flow of water it obviously backed up all over the patio and the amount of grime and thick black silt that was flowing up was incredible. But when I got through it was so satisfying.To finish the job off used the attachment that fires water 360 degrees around whilst also self feeding itself through the pipe work cleaning and flushing it all out.Excellent piece of equipment, highly recommend.

I had a partially blocked sink waste 6 metres long under a concrete floor with two right angle bends in the pipe. The kit is of very good quality and even has a roll of PTFE tape for the joints. The adapter was a good fit on my karcher pressure washer and cleared the pipe very easily and quickly. The tube is about 1cm in diameter and is surprisingly small when coiled and 15 metres fits in a box 20cm square and 4cm deep.it went round the pipe bends easily and did a great job.

Works with Karcher K2.

Works reasonably well but PTFE tape (handily supplied) is essential to reduce leaks. One nozzle produced so much back pressure it caused the Karccher to cut out repeatedly. Hose doesn't curve enough to go round a right angled 100mm drain pipe joint while trying to clear a blocked downpipe.

I wanted to clean my drains & downpipes without going to the expense of getting anything expensive, so did a bit of research & read that Bosch AQT attachments fit screwfix titan pressure washers, so I bought this hoping it would fit my titan. I must say it fitted my titan pressure washer perfectly, so I was very pleased. There were also additional attachments, one for a karcher & another which appears to be for some sort of quick connect system, but obviously I didn't need these.The hose appears to be very well made considering it was manufactured in China. I've used it once, so can't comment on durability, but it looks well made & I therefore expect it to last quite a few years.There are two nozzles provided in the box, one spins as it jets one forward & also three jets backwards. This is supposed to clean all around the drain as it travels through the drain. The other one does the same, except it doesn't spin. So both have one forward jet & three rear jets. Both produce enough pressure to drag themselves through the drain unaided if the pipe is uncoiled & pulled straight beforehand. The pipe is flexible enough to snake through the drains OK, but it clearly wouldn't be flexible enough to go past a toilet U-bend.It is alo supplied with a small roll of ptfe tape. I wrapped the tape around the threads on both ends of the pipe a few times before screwing on the nozzle (with the little spanner that was included) & the attachment to fit it to the pressure washer & it didn't leak at all. There's plenty of tape left over for when I change the nozzle.The single sheet of instructions that came in the box (also on the amazon pics) shows that the nozzles have a 1/8" female thread. I don't know if they are 1/8" or not, but do intend to buy some extra nozzles. I've had a quick look online & it seems that of all the sewer nozzles availiable, there are plenty in larger sizes, but the 1/8" options seem to be somewhat limited. I find this strange as you would think the smaller the nozzle, the better able it would be to travel through the drains, have a higher water pressure because it goes through a smaller hose & therefore be more popular.So in short, it does exactly what I wanted, is reasonably good quality & therefore I'm pleased with it.