RKX AC Compressor Control Solenoid Valve for Zexel DCW17E, DCS17E for VW and Audi (ZEXEL)

Fits my 2007 Audi A3. Air is nice and cold now. Part had a small screen attached (not shown in pictures) which prevented it from fitting all the way. Removed it, fit perfectly. Once recharged system, air conditioner worked great.

It worked! The A/C wasn't working at all. Some people had different symptoms of intermittent A/C coming on and off. On my VW Passat, there was no A/C, even after running it for more than an hour. After installing this valve, the A/C worked flawlessly. Dealership wanted over $1200 to install a new compressor. This valve saved me over $1000.Install notes: I was able to install it with the compressor in place using an angled snap ring tool (on a 2006 VW Passat). Make sure to discharge the system before taking out the old valve (refrigerant can severely injure you). You MUST lubricate the O-rings with A/C lubricant on the new valve before installing. Don't forget to reinstall the snap ring before charging the system. Also charge the system with a can of A/C lubricant before charging with refrigerant.

I was hesitant to buy it but after all reviews decided to get it and the price is not bbadat allI would give 6 stars if I could

I put this on my 2006 Passat 2.0 automatic.I had mediocre cooling from my ac.I also noticed my AC cooling fan at the Radiator was not working. So I ordered a new fan and this solenoid valve and did them at the same time.I recharged my system and its sooo much better than before... Im happy.Installation note. You might want to harm yourself during the change out process. Its doable.. It just sucks hard. Embrace it and settle in for some difficulty if you are replacing this while the pump is on the car. Which is what I did. First, get your c clip pliers and use the 45 degree angle attachment. You will understand why when you get under the car. I grabbed for the only clip end I could see and squeezed and pulled and eventually got one side out,, I then used a slim screwdriver and pulled it out . Then I used a small Orange handle pry bar. You can use a screwdriver I guess. pried it out. Getting the new one in is a whole different kinda headache. Taking out the old one is easier than putting the new one in.First make sure the valve is seated allll the way in.. It might feel all the way but its probably not. Tap with a wooden block and small hammer.2. Getting that c clip reseated in there is a B%*tch. ! Squeeze the clip down pretty good and shove it down in there. You might need to hold at some point,,and push the other side of the clip down in with a slim screwdriver. Good luck.. Its worth it in the end.. Otherwise just take the pump off and do it on a bench.

Works perfect ice cold ac now without buying a new compressor. You do need to have some long 90 snap ring pliers to get it out. Rkx makes good products get this and do it once