Swift Mount SWIFT200-AP Low Profile TV Wall Mount for TVs up to 39-inch, Black, 8.9 x 8.9 x 0.8 inches

Is workable but could be a little better

I'm really pleased with this TV mount. I've had it up for 4 months now. It's just two low profile pieces. The piece that gets attached to the wall is pretty small (roughly the width and height of a deck of cards). The piece that you attach to the TV is much bigger and what you see in the item description picture. The TV I have mounted with this is a 32" that's 1.5" deep and weighs 15.4 lbs.I have a few critiques for anyone looking to purchase it:Pros- Easy install. The clasp has a few degrees of rotational play in it so if you don't have the wall mount perfectly alligned, you can still rotate the TV a few degrees in either direction (don't worry, it doesn't rotate freely and requires a few pounds of pressure against the corner of the TV to move).- It has a "V/wedge" shaped clasp that makes taking down and putting up the TV really simple. If I need to add a cable to the back of the TV, I just lift the TV up a couple inches and it's off. Putting the TV back up on the wall is easy because the wedge shape of the bracket doesn't require you to have it aligned perfectly when setting it in.- Don't have any worries that my TV will fall down using this mount (I have a mech eng degree for what it's worth).Cons- That "V/wedge" clasp has a little play in it so my TV won't lay perfectly vertical and tilts down about a couple degrees. Trust me, it's nothing noticeable even if you're watching straight on at eye level which I am.- The construction is pretty sturdy but I noticed that the mount that attaches to the TV has bowed out about 1/8" from the center. It's not a big deal but considering this mount is only a 1/2" deep, it's significant percentage more. I was really trying to keep my TV as low profile as possible since it's in a high traffic area.

Two screws and you are done with the wall part. Four more screws (Provided) in the four corners of the TV back and you are done. Just pick your TV up and slide it onto the wall mount. Done. Enjoy!

Slim (just under 1” from the wall) and sturdy, but there is no lock. Basically this is a slide mount system. Half of the bracket is wall mounted and the other half on the TV. The tv mount slides on to the wall mount notch and friction holds it securely in place. However, there is no screw or locking mechanism.

Works well enough. I think my TV is heavier on one side than the other or the mount is a bit off, since it wants to sit a bit lopsided in the mount (when looking at it straight on, left side was closer to the wall and slightly lower than the right side). Checked level with two levels, and it was fine. Stuck a piece of wood behind the tv to push it away from the wall a bit on the left side which helped level it out. Wouldn't stop me from using another.

solid one piece. I used mine as a 100x100 to 200x200 interface for the newer monitors which are bigger but lighter than previous units. Very sturdy and I just flipped it and attached to devices using included risers as separator from the wall mount interface. great price.

Nice slim fit TV hanger. Came ready to install, with multitude of screws (neatly organized and separated into sealed bags) for any TV/wall. There was only one small issue while hanging - there is a place to put a screw that holds both the TV piece and wall piece together, but once the TV is on the wall you need a very long screwdriver to get behind the TV and screw in the screw. Other than that, everything was really easy and its holding my 32" TV perfectly fine.

Mount was ok quality-wise. The bolts to attach the TV weren't long enough for my TV (in fact I'm not too sure how well they would work on most TV's for that matter), and I couldn't actually use this in my RV which is what I bought it for. The framed in space in my RV doesn't have enough height to slide the bracket over the receiver part and still fit in the frame. So back to the drawing board. Otherwise, I think it would work for anyone trying to basically 'flush mount' a TV to a flat wall.

I was looking for a mount that would hold my tower close tonthe wall without any arms or hardware creating extra space, for a flush look. This does a great job of that, however although my tower is well under the weight limit, because of the physical nature of how small the mlijting point is, there's enough movement that I had to put a couple rubber "feet" on the bottom side of the tower to stop it from looking like it was tipping forward. Now this is a combination of the mount flexing and my tower having a small flex. If your mounting a small tv you shouldn't have this problem. As far as mobile applications like in a camper or RV, you can use this, but don't travel with it on the wall. There's no way to secure it to the wall, it's just holding with gravity. Will buy again to mount my second p3 on the wall in the future.

If you are looking to get your panel as close to the wall as possible, this is probably your best bet.No adjustments (angle) or up/down once you bolt to wall, but mount plate has a slot for bottom screw so you can get it deal level . . . Created a few extra inches of monitor/user separation in the workspace and also freed up all the desk area the base was consuming. Very happy with the purchase for the purpose.

Not what we were expecting.

Vale mucho la pena por el costo tan accesible y el material es de buena calidad, cumple con las expectativas perfectamente.

Cumple para lo que fue diseñado de una manera sencilla